Sohc owner help

[HondaCivicEx98]

Hi everyone, this is gettting out of the way.
but for some reason the car vibrates alot. i heard that JR has a Bracket that support the blower. Anyone know. i try to contact JR to tell them about this issues but they dont seems to offer me any bracket. I need u guys to see if they really have this bracket or not. Cause it start the vibrates alot and make other stuff ratle.
thanks

[HondaCivicEx98]

Hey wasup Reggie?
Do i call JR for that Bracket and should it be free? I havent fix the exhaust yet(no time) but i found the problem. It is the heat shiled right above the Resonator.
Thanks Reggie(Bigkat).

Sjoback, thanks for reminding us.

[HondaCivicEx98]

Reggie, i need ur help pls.
Could u tell me where exactly the Bracket is located? Is the bracket visible? If i need to install the braket, does it require the blower and manifold to be removed in other to installed. Thanks

[sjoback]

regg where'd you go?

well since he's not here...

the bracket is free and you can get it from JR. you don't have to remove anything, just need to get under the car.

if you see my other post, there is a pic of what most of the bracket looks like.

[HondaCivicEx98]

Hey
sjoback thanks alot i apreciated that.

[Bigkat]

Sorry Ricardo....went to get my lift on and my daily run in. Got to stay in shape for the ladies.......well my lady

Yeah, that bracket should be free, it mounts to the back of the blower casing. Good luck big guy. Now I gotta go eat my 3 chicken breast and cottage chesse

[elmo]

Can you be more specific? When does it vibrate? At idle? While driving? Certain RPM in a certain gear? Are there rubbing/clicking/clunking noises while the vibration happens?

------------------
99 Civic DX Hatchback, JRSC + FP, Eibach Pro Kit, ST Sway Bars, Borbet Type F's, Yok A520's 205/45-16's

[HondaCivicEx98]

Cool Bigkat. i will contact JR.
thanks again.

elmo: It vibrates while drving and at ilde as well. Is not much but it is making other stuff rattle as well and whne windows are roll up it kind of buzz. Really anoying. Thanks for u guys help.
I am glad to see this baord with these friendly people.!!

[Bigkat]

Ricard.....whaassssup!!

On my 95 EX kit a 1/4in by 10-12in steel bar(hole on each end) with a steel L-braket(same 1/4in steel). It mounted to the blower casing(copper o ring place in v shape piece of the casing) and to OEM mounting point on the lip just under the oil filter(left of filter). Does that make sense..........?

Heah, did you get the exhaust fixed? I was told my exhaust piping was rubbig against the fuel tank. He supposedly bent it away, but now I'm hear 3000rpm rattle(sounds like it loose at the cat). A little pissed off, but I'm replacing the header/exhasut in a few weeks.

[sjoback]

yeah JR has a braket and newer pressure switch too, if you don't have that.

keep your eye on the bracket though. mine just broke.